Introduction » Hardbodies » Deep Bed for Ford F350


        

Deep Bed for Ford F350

NEW

In Stock

 

Product no.: B-017
Scale: 1/10
Material of body: Hard Black Plastics
Manufacturer: Loops Model
Lenght: 185mm
Width: 180mm
Normal price 89.00 USD
Our price without Tax: 65.29 USD
Our price including Tax (21 %):
79.00 USD

into the basket:
  pc  

This is a 2017 NEW deep and short bed for Tamiya Ford F350 Hardbody.

This bed fits also Ford F350 Double Cab hardbody by Loops Model - available in our store! All parts from Tamiya body are compatible with little modification.

You need to cut out rear stock bed mounts and attach the body using M3x10 screws and lock nuts (included!).
You have to cut out a part of tail lights and attach them with CA glue!


Dimensions:
lenght: 185mm (stock bed is 220mm)
width: 180mm over fenders - same as cab width or stock bed width
depth: 33mm (stock bed is 15mm deep)

wheelbase with stock F350 hardbody: 250mm (stock hardbody + stock bed = 285)
wheelbase with F350 Double cab hardbody from our store: 325mm (F350 double cab hardbody + stock bed = 360mm)

Included:

  • short and deep bed for F350
  • rear bed door panel
  • 5x M3x10 stainless steel screw
  • 5x M3 lock nut


Required (not included!)

  • rear lights and lights buckets (stock Tamiya parts fits with modification described above)
  • F350 Cab and all body parts!

If you own Tamiya F350 Body you can simply upgrade it with this short and deep rear bed. Ideal for modified racing truck builds! Just remove all parts from Tamiya bed and place them on this NEW bed. Please be sure that this body part requests some work. Tamiya parts fits well but they request modifications like trimming and sanding for perfect fit. We recommend to attach the bodyparts with CA glue!

Rubber Fenders  for Tamiya F350 fits and are being sold separately in our store! When attaching body parts you have to abrade inner side of fenders and attach with quality CA glue.

Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.

Made in Czech Republic

Views and questions VISITORS

go1aZ0GnJl
ZyTHRoLZf4I
14.03.2017 15:52
ZmM5Y