Introduction » Gears and Diff lockers » Diff locker for Tamiya Diffs


        

Diff locker for Tamiya Diffs

NEW

In Stock

 

Product no.: XC-002
Material: Hard Black Plastics
Manufacturer: Loops Model
Our price without Tax : 4.13 USD
Our price including Tax (21 %):
5.00 USD

into the basket:
  pc  

This is diff lock for Tamiya CC-01 (XC) differential. Can be used in rear diff and also in front diff.


Using this part you can easily lock your axle without any unremovable modification. Open the differential and just remove three small bevel gears and star shaft. Large bevel gear let lay in differential, add one half of diff lock, add star shaft, add second half of diff lock and then add the second large bevel gear and close the differential with its cover. Then tighten the screws. Your diff is locked now! You can unlock it easily with removing the diff lock and mounting back the small bevel gears.

You will receive a set of diff lockers for 1 differential only!

This diff locker works also with Tamiya TA-02 planetary differential and with TL-01 planetary differential. Works also with GF-02, TA-03 and all other cars that are using differential Tamiya (50602) Diff. Bevel Gear

Fits Tamiya XC Mitsubishi Pajero, Tamiya XC Jeep Wrangler, Fits Tamiya XC Honda CR-V, Tamiya XC Isuzu MU, Tamiya XC Mercedes Benz Unimog U403, Tamiya XC Toyota Land Cruiser, Tamiya XC Landfreeder, Tamiya XC Toyota FJ-Cruiser, Tamiya XC Ford Bronco and all other Tamiya XC (CC-01) based models.

 

 

Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.

 

Made in Czech Republic

Views and questions VISITORS

Privacy Policy
The legal grounds for your personal data processing is your consent given to the Controller within the meaning of Article 6 (1) (a) Regulation (EC) No 2016/679 of the European Parliament and of the Council on the protection of individuals with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46 / EC (General Regulation on the protection of personal data) (hereinafter referred to as “Regulation”). The purpose of your personal data processing is to send tax documents for the lease of the system, business communications, and other marketing activities by the controller to your person.

Warning. Webmaster reserves the right to remove obscene or such contributions, which would harm the interests Webmaster.

NmNlMT