Introduction » For F350

For F350


USD
USD
2017 NEW ARB Style rear bumper for 1/10 Scale Tamiya High Lift Ford F350 Fits all Tamiya High Lift Ford F350 bodies withou any modification. You just have to drill 2 3mm holes in rear bed panel. Needs M3x8 screws.Dimensions: width: 168mm height 24mm You are buying only unpainted ARB Style bumper in black colour. Finished bumper with silver paint mounted on car is for referetion only. No car
Our price 18.00 USD

In Stock
NEW


2017 NEW ARB Style front bumper for 1/10 Scale Tamiya High Lift Ford F350   Fits all Tamiya High Lift Ford F350 bodies withou any modification. It uses original mounting spots in front grille. There are 2 optional mounting spots in bumper for mounting on chassis frame. Needs M3x8 screws.There are four spots for instalation of 5mm LEDs (not included!)This is version for body with rubber
Our price 23.00 USD

In Stock
NEW


2017 NEW ARB Style front bumper for 1/10 Scale Tamiya High Lift Ford F350 Fits all Tamiya High Lift Ford F350 bodies withou any modification. It uses original mounting spots in front grille. There are 2 optional mounting spots in bumper for mounting on chassis frame. Needs M3x8 screws.There are two spots for instalation of 5mm LEDs (not included!)This is version for body without rubber
Our price 23.00 USD

In Stock
NEW


This is a 2017 NEW deep and short bed for Tamiya Ford F350 Hardbody. This bed fits also Ford F350 Double Cab hardbody by Loops Model - available in our store! All parts from Tamiya body are compatible with little modification.You need to cut out rear stock bed mounts and attach the body using M3x10 screws and lock nuts (included!).You have to cut out a part of tail lights and attach them with
Normal price 89.00 USD
Our price 79.00 USD

In Stock
NEW


This is a set of wipers (3pcs) for your RC car. Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. Made from soft and flexible rubber. Can be shortened easily using sharp knife. This part is also suitable for Drift cars and Rally cars. You will
Our price 6.50 USD

In Stock
NEW


This is a set of rubber fender flares for Tamiya F350. They fit the body without any modification. We recommend attaching with quality CA Glue. Set for 1 complete car.   Fits Tamiya High Lift Ford F350, Ford F350 Doublecab by Loops Model   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that
Our price 32.00 USD

In Stock


Rubber mirrors are very flexible and won´t break as the plastic ones. Fits Tamiya High Lift Ford F350, Ford F350 Doublecab by Loops Model   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not
Our price 8.00 USD

In Stock


Rubber Safari Snorkel is very flexible and gives super scale look to your Ford F350!   Fits Tamiya High Lift Ford F350, Loops Model Ford F350 Doublecab.   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts –
Our price 16.00 USD

In Stock
NEW

YjQzMz