Introduction » For Tundra

For Tundra


USD
USD
This is an ARB styled front bumper for Tamiya Toyota Tundra. It is made from hard and durable black plastics. Bumper includes orange position lights ready for 3 mm LEDs - 1 pair of 3 mm LED buckets and 1 pair of transparent orange covers. Also there are slots for 8 mm LEDs. LEDs are NOT included. Dimensions: width: 175 mm height: 25 mm Bumper is designed to be attached to the chassis. You have to
Normal price 25.00 USD
Our price 24.00 USD

In Stock
NEW


Clear window set for Tamiya Tundra. It was never easier to make your Tundras windows clear. Each piece is covered by protection layer on both sides to avoid any scratches. Use thick CA glue to attach - check Building materials section for suitable glue. Fits: Tamiya High Lift Toyota Tundra Made in Czech Republic
Our price 11.00 USD

In Stock
NEW


2016 NEW! Rubber mirrors are very flexible and won´t break as the plastic ones. Newer version brings new desigh to your 1/10 scale Tundra! Fits Tamiya High Lift Toyota Tundra Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the
Our price 8.00 USD

In Stock
NEW


This is spare cap for all rubber Safari Snorkels. It is a replacemetn for the lost one.   Inside diameter of hole is 6mm.   Fits all Safari Snorkels.   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts –
Our price 3.50 USD

In Stock


This is a set of wipers (3pcs) for your RC car. Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. Made from soft and flexible rubber. Can be shortened easily using sharp knife. This part is also suitable for Drift cars and Rally cars. You will
Our price 6.50 USD

In Stock
NEW


This is a set of rubber fender flares for Tamiya Tundra. They fit the body without any modification. We recommend attaching with quality CA Glue. Set for 1 complete car.   Fits Tamiya High Lift Toyota Tundra.   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products
Our price 32.00 USD

In Stock


This is spare cap for all rubber Safari Snorkels. It is a replacemetn for the lost one.   Inside diameter of hole is 6mm.   Fits all Safari Snorkels.   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts –
Our price 3.50 USD

In Stock


This is spare cap for all rubber Safari Snorkels. It is a replacemetn for the lost one.   Inside diameter of hole is 6mm.   Fits all Safari Snorkels.   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts –
Our price 3.50 USD

In Stock


This is spare cap for all rubber Safari Snorkels. It is a replacemetn for the lost one.   Inside diameter of hole is 6mm.   Fits all Safari Snorkels.   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts –
Our price 3.50 USD

In Stock


Rubber Safari Snorkel is very flexible and gives super scale look to your Toyota Tundra!   Fits Tamiya High Lift Toyota Tundra. Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the
Normal price 16.00 USD
Our price 13.00 USD

In Stock
NEW
Action

NmQ1MjA