2016 NEW Defender front lights ready for LEDs!
Set of front lights ready for 6 LEDs. New rebuild front headlight parts with integrated LED bucket for headlight and 4 slots for position lights and winkers. Fits Land Rover Defender D90 and D110 body. Can be used for RC4WD Gelande 2, MEX D90 and D110 and all Loops Model Defender bodies.
These lights will let your Defender shine very easily! Just drill holes in body as shown on picture and attach a whole new fron light part into the body using a CA glue. Small LED lights and headlight lens need to be attached with CA as well. No painting needed, lights already come in colour - made from coloured orange material.
There is a slot for 3mm (smaller lights) and 5mm (headlight) LEDs.
You will receive:
2x orange light ready for 3mm LED (winkers)
2x clear light ready for 3mm LED (position lights)
2x clear lens for headlight
2x black plastic front part with integrated 5mm LED bucket for headlight
NO LEDs are included !!!!!
Use high quality CA (instant) glue to attach. For example Surefix glue from Building material Category.
Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.
Made in Czech Republic