2016 NEW Rotopax Styled Fuel Canister in scale 1/10
A must have item for your scaler!
It is a mold - NOT a 3D printing. Made from red plastics material. Cap is separated from the canister.
Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler.
Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.
Made in Czech Republic