Introduction » Scale Accessories

Scale Accessories

In this section you are going to be fooled with scale stuff! The "must have" parts for your scaler or garage. The Drifters also may be interested. :)


USD
USD
2016 NEW Rotopax Styled Fuel Canister in scale 1/10 A must have item for your scaler! It is a mold - NOT a 3D printing. Made from red plastics material. Cap is separated from the canister. Dimensions: 86x35x5mm   Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo,
Our price 6.90 USD

In Stock
NEW


This is a scale fuel cannister. Necessary scale part for your scaler or scale garage! It is a mold - NOT a 3D printing. Made from red / blue plastics material. Cap is separated from the canister. Dimensions: 37x24x15mm   Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho,
Our price 4.50 USD

In Stock
NEW


This is a Jerry Can KIT. It should represent a 20 Liter fuel canister. A must have item for your scaler! Sold as unpainted KIT conaining 4 pieces. You have to build the canister using CA glue (Surefix - check building material Category) and paint it with spray or small brush.   NOTE: Last 2 pictures shows old version of Jerrycan with a text, you will receive a NEW version without any texts.
Our price 4.00 USD

In Stock
NEW


This is a Scale High Lift Jack. A must have item for your scaler! Now in blue colour!! :)   Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler.   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products
Our price 7.00 USD

In Stock
NEW


This is a Scale Car Battery for Scale Crawlers. Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. This part is also suitable for Drift cars. You can use it in your car or in scale garage diorama. The dimensions shown in pictures are in centimeters.
Our price 4.50 USD

In Stock
NEW


This is a Scale Car Battery for Scale Crawlers. Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. This part is also suitable for Drift cars. You can use it in your car or in scale garage diorama. The dimensions shown in pictures are in centimeters.
Our price 4.50 USD

In Stock
NEW


This is a scale fuel cannister. Necessary scale part for your scaler or scale garage! It is a mold - NOT a 3D printing. Made from red / blue plastics material. Cap is separated from the canister. Dimensions: 37x24x15mm   Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho,
Our price 4.50 USD

In Stock
NEW


This is a Propane Gas Cylinder, mostly known in Middle and Eastern European states. Really unique part for your scale garage!   Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler.   Products are completed of 90%. It is necessary to abrade the contact
Our price 8.00 USD

In Stock
NEW


This is a pair of Scale Roof Carriers V2 for your scaler. They can fit any body if the size is suitable. This part is suitable also for Drift cars. 1 pair (2 pieces) of Scale Roof Carriers is included. You can use it on your car or in scale garage diorama. The dimensions shown in pictures are in centimeters.   Products are completed of 90%. It is necessary to abrade the contact area before
Our price 9.00 USD

In Stock
NEW


This is a pair of Scale Roof Carriers for your scaler. They can fit any body if the size is suitable. This part is suitable also for Drift cars. 1 pair (2 pieces) of Scale Roof Carriers is included. You can use it on your car or in scale garage diorama. The dimensions shown in pictures are in centimeters. Products are completed of 90%. It is necessary to abrade the contact area before final
Our price 9.00 USD

In Stock
NEW


This is a pair of scale and lightweight Sand Ladders. These are for DECORATION only. They are not functional. They are lightweight and you can place them on the roof of your scaler and center of gravity will not be affected at all! Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial
Our price 10.00 USD

In Stock
NEW


This is a Scale Toolbox. This box is openable.   Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler.   You can use it in your car or in scale garage diorama. The dimensions shown in pictures are in centimeters.   Products are completed of 90%. It is
Our price 6.00 USD

In Stock
NEW


This is a Scale Oil Bottle for Scale Crawlers.   Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. This part is also suitable for Drift cars. You can use it in your car or in scale garage diorama. The dimensions shown in pictures are in centimeters.
Our price 4.50 USD

In Stock
NEW


This is a Scale High Lift Jack. A must have item for your scaler!   Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler.   Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra
Our price 7.00 USD

In Stock
NEW


This is a Scale Car Battery for Scale Crawlers. Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. This part is also suitable for Drift cars. You can use it in your car or in scale garage diorama. The dimensions shown in pictures are in centimeters.
Our price 4.50 USD

In Stock
NEW


This is a Scale Car Battery for Scale Crawlers. Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. This part is also suitable for Drift cars. You can use it in your car or in scale garage diorama. The dimensions shown in pictures are in centimeters.
Our price 4.50 USD

In Stock
NEW


This is a Scale Car Battery for Scale Crawlers. Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. This part is also suitable for Drift cars. You can use it in your car or in scale garage diorama. The dimensions shown in pictures are in centimeters.
Our price 4.50 USD

In Stock
NEW

MDUzZGI5Y