Introduction » Body Accessories » 2x Rubber Light for Scale Crawlers Red
2x Rubber Light for Scale Crawlers Red
NEW
In Stock
High quality and very flexible Rubber Lights with yellow lens. Made from soft and flexible rubber. It will not break!
The hole is intended for standart 5mm LED.
You will receive 1 pair of lights with clear plastic covers.
=
2x Rubber Light
2x Clear red plastic cover
You have to attach the clear cover into light using a CA Glue. Pictures of clear reflector are just for illustration!
Fits: All bodies in scale 1/10 and 1/8. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler. Can be used also with any other body.
Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.
Made in Czech Republic
Manual for instalation