ARB Styled Bumper for Toyota Land Cruiser HDJ80

This is an ARB styled front bumper for Toyota Land Cruiser HDJ80 (LC80) hardbody. It is made from hard and durable black plastics. It is a massive piece of plastics that will not break easily.

Dimensions:

• width: 212 mm
• height: 30 mm

Bumper is designed to be attached to the chassis. You have to make your own mount for it. There are slots for M3 screws from inside of bumper.

Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.

Made in Czech Republic