Introduction » Body Accessories » Clear rear lights set for LEDs Defender D90 and D110
2016 NEW Defender rear lights ready for LEDs!
High quality transparent rear lights and LED buckets in one piece for Land Rover Defender D90 and D110 body. Fits all 1/10 Defender bodies. Can be used for RC4WD Gelande 2. Can be used also with any other body.
This is a clear set intended for painting or just leaving all lights clear.
Pictures of coloured set is just for ilustration! You will receive what shows picture bellow!
These lights will let your Defender shine very easily! Just drill holes in body in position of stock lights and attach NEW lights, then attach LED with CA glue into light tube. And thats ALL!
There is a slot for 3mm (smaller light) or 5mm (larger light) LEDs.
You will receive:
2x clear transparent light ready for 5mm LED
4x clear transparent light ready for 3mm LED
NO LEDs are included !!!!!
Use high quality CA (instant) glue to attach. For example Surefix glue from Building material Category.
Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.
Made in Czech Republic