2016 NEW Defender rear lights ready for LEDs!
High quality transparent and coloured rear lights and LED buckets in one piece for Land Rover Defender D90 and D110 body. Fits all 1/10 Defender bodies. Can be used for RC4WD Gelande 2. Can be used also with any other body.
These lights will let your Defender shine very easily! Just drill holes in body in position of stock lights and attach NEW lights, then attach LED with CA glue into light tube. And thats ALL! No painting needed, lights already come in colour - made from coloured material.
There is a slot for 3mm (smaller light) or 5mm (larger light) LEDs.
You will receive:
2x orange light ready for 3mm LED (winkers)
2x red light ready for 3mm LED (tail and brake lights)
1x red light ready for 5mm LED (fog light)
1x clear transparent light ready for 5mm LED (reverse light)
NO LEDs are included !!!!!
Use high quality CA (instant) glue to attach. For example Surefix glue from Building material Category.
Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.
Made in Czech Republic