Introduction » Hardbodies » Land Rover Defender D90 Kahn Hardbody
2016 NEW !!!
Let us introduce you Land Rover Defender D90 Kahn Design Widetrack Hardbody! It is a complete KIT with all body parts needed for building of a body. Hardbody is ONE PIECE MOLD. Body set contains 43 parts! All parts are made from high quality plastics, body and main body parts are made from hard black plastics.
Many thanks to Lukas Kolovecky, builder of the origin Kahn D90 Wide Track hardbody, that asked us to produce the body. A lot of thanks also to Michal Jasny, Jiri Pstruzina and Petr Mracek - all these guys worked hard on this body and without these extremely skillfull people would Kahn D90 Hardbody set never look as amazing as it does.
Car shown on pictures is based on lightly customized Axial SCX10 Dingo KIT, wheels were bought on rcmodelex.com and tires are 1.9 RC4WD Dirt Grabbers.
Set includes:
Advantages of Kahn Hardbody:
This body is based on well known Land Rover D90 white hardbody, it is a great replacement for your white stock D90, if you own MEX D90 or RC4WD Gelande chassis you can just switch it, no other customs are required! Kahn has integrated body fenders that makes it +15mm wider.
Building this hardbody requires some modeling skills. You need to attach all body parts using a quality CA (instant) glue, we sell this glue in "Building material" category. Body parts may require light sanding to fit perfect, we strongly recommend to remove grease using for example dishwashing detergent and abrade all contact areas between body parts with sand paper for perfect contact and strenght. Body may require light filling, two component polyester filler is recomended (used for 1/1 size cars). Tamiya putty and Miliput are also suitable. Front Kahn headlight covers requires instalation of four 5mm LEDs as position lights and winkers - no light covers are included. Front bumper requires 2x 5mm and 2x 8mm LED. Headlights requires 2x 5mm LED. Rear lights requires 4x 3mm LED and 2x 5mm LED. Lexan pre cut window set has protective film on both sides, remove before assembly and be carefull with glue. You can also fit these windows using 2mm screws and nuts.
Notes:
Made in Czech Republic