Introduction » Gears and Diff lockers » Modified Spur + Pinion for CC-01 / XC


        

Modified Spur + Pinion for CC-01 / XC

NEW

In Stock

 

Product no.: XC-003
Material: Hard Black Plastics + Metal
Manufacturer: Loops Model
Our price without Tax : 14.88 USD
Our price including Tax (21 %):
18.00 USD

into the basket:
  set  

Check DOWNLOADS for Installation Manual !

This is a special gearing set for Tamiya CC-01 / XC Chassis. This set was developed for XCs that are using HPI Gear reduction unit + 20 or 27T motor to make them much faster than with stock gearing. This gearing makes ideal compromise between speed / power / battery consumption. Gears has Module 1 teeth.

Modified gears

This product requires almost NO modification on chassis. We noticed that some chassis requires to drill more space (about 1mm) next to the pinion gear on the gear cover.

This product was tested almost 1 year before we decided to offer it to YOU. Yes, it is tough enough!

Modified gears

Modified gears

Modified gears

 

In following videos you can see how it works in cars, both cars have HPI WK + 20T Saturn motor + Modified gearing set.
Isuzu Amigo
Pajero Wagon

Fits Tamiya XC Mitsubishi Pajero, Tamiya XC Jeep Wrangler, Fits Tamiya XC Honda CR-V, Tamiya XC Isuzu MU, Tamiya XC Mercedes Benz Unimog U403, Tamiya XC Toyota Land Cruiser, Tamiya XC Landfreeder, Tamiya XC Toyota FJ-Cruiser, Tamiya XC Ford Bronco and all other Tamiya XC (CC-01) based models.

 

 

Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.

 

Made in Czech Republic

Views and questions VISITORS

Privacy Policy
The legal grounds for your personal data processing is your consent given to the Controller within the meaning of Article 6 (1) (a) Regulation (EC) No 2016/679 of the European Parliament and of the Council on the protection of individuals with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46 / EC (General Regulation on the protection of personal data) (hereinafter referred to as “Regulation”). The purpose of your personal data processing is to send tax documents for the lease of the system, business communications, and other marketing activities by the controller to your person.

 

Rewrite picture: *
captcha New picture

Warning. Webmaster reserves the right to remove obscene or such contributions, which would harm the interests Webmaster.

YjJlYm