Introduction » Body Mount Sets » SCX10 Body mounts for D90 Hardbody


SCX10 Body mounts for D90 Hardbody


In Stock


Product no.: X-021
Material: Clear plastics
Manufacturer: Loops Model
Our price without Tax : 21.49 USD (18.95 EUR)
Our price including Tax (21 %):
26.00 USD (22.93 EUR)

into the basket:

2016 NEW!

This is a special body mount set for Land Rover Defender D90 Hardbody. It enables to attach D90 on Axial SCX10 Chassis.

Set includes 4 parts:

  • left side body mount
  • right side body mount
  • rear body mount with bumper
  • front body mount

Required SCX10 chassis customizations:

  • front links has stock lenght, adjust rear links to 275mm wheelbase
  • attach side body mounts using screws +4mm longer compared to stock, holes are the same
  • make the chassis shorter in the rear part to fit under the body
  • drill new holes in rear and front acording to holes in front bumper mount and rear bumper mount
  • change your stock tires with tires with outer diameter 95-100mm
  • create "drop set up" - remove small springs from stock shocks and screw down the "O ring nut" - check photo below carefully


SCX10 Kahn D90 Bodymounts


SCX10 Kahn D90 Bodymounts

SCX10 Kahn D90 Bodymounts

SCX10 Kahn D90 Bodymounts

Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.


Made in Czech Republic

Views and questions VISITORS

14.03.2017 17:30