Introduction » Working Scale Parts » Sand Ladders Orange
Now in ORANGE also!
This is a pair of Sand Ladders. They are made from very hard plastics, their rough surface gives enough traction for tire. They are made in scale 1/10 and their size is certified for races like AST, ASTS, CEST and HRCTT.
They have a hole for magnet inside down. Magnet will hold the sand ladder on your truck. Magnet is NOT included.
Fits all trucks in scale 1/10. Can be used for example with Ford F350 High Lift, Hilux High lift, CC-01 Pajero, Wrangler, RC4WD Gelande, Trailfinder, Mojave, Axial SCX10 Honcho, Dingo, Jeep Wrangler.
Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.
Made in Czech Republic