Introduction » Tatra Trucks 1/14 » Tatra 813 8x8 KOLOS KIT 1/14


Tatra 813 8x8 KOLOS KIT 1/14

In stock again! Upgraded version!


Out of Stock


Product no.: 813-1
Scale: 1/14
Chassis Type: Loops Model Backbone Chassis
Manufacturer: Loops Model
Wheelbase: 385mm (between 1st and 4th axle)
Lenght: 610mm
Width: 185mm
Height: 200mm
Discount coupon can not be used
Our price without Tax : 1,321.49 USD (1,164.45 EUR)
Our price including Tax (21 %):
1,599.00 USD (1,408.99 EUR)

into the basket:

You might be interested also in...

Product no. / Goods name:
In Stock:
Set of steps for Tatra 813 L
Set of steps for Tatra 813 L
In Stock
Our price 17.90 USD (15.77 EUR)
Underbody coverage for Tatra 813 L
Underbody coverage for Tatra 813 L
In Stock
Our price 17.90 USD (15.77 EUR)
Width Indicators for Tatra 813
Width Indicators for Tatra 813
In Stock
Our price 9.90 USD (8.72 EUR)
Driver for Tatra 813
Driver for Tatra 813
In Stock
Our price 11.90 USD (10.49 EUR)
Passenger for Tatra 813
Passenger for Tatra 813
In Stock
Our price 11.90 USD (10.49 EUR)

2019 NEW

We are proud to announce our brand new Tatra 813 8x8 Kit in scale 1/14. It took 2 years of development and its available to purchase.

We have limited production capacity to 2-3 KITs each month. Please contact us for more information about waiting time.

All KITs sold started from June comes with new design of half axles, new rebuild gearbox and redesigned axle gearing with large profile ball bearings.

Chassis has unique Tatra design called "backbone chassis", each half-axle has independent suspension.

  • hard black plastics differential housings, axle covers, steering system and suspension parts.
  • all metal gears and CVA axles
  • inox steel central backbone tube
  • full ball bearings
  • aluminium U-profile frame for rear bed attachment
  • hard black plastic 3 pieced beadlock rims
  • soft rubber tires with unique Tatra design

Tatra 813 Cab - long version

  • complete body KIT consisting of 4 side panels, roof and many body detail parts
  • complete interior including dashboard, seats, steering wheel etc
  • front bumper with LEDs ready lights
  • pre-cut clear lexan windows

Each kit includes 20 kg steering servo.

Required electronics (not included):

  • 540 size motor (brushed or brushless)
  • electronic speed controller
  • 2 channel radio system (at least)
  • 2 or 3S Lipo or 7,2 V Nimh
  • LED light module, 5 mm and 3 mm LEDs

Complete assembly manual ready to download as PDF in download section above. ↑

Main designer of chassis: Sebastian Korynta

New gearbox design with all metal gears. It has higher gearing ratio and is more quiet compared to the old one.

Each half axle is powered by one pair of gears. It is full time 8x8 driven chassis without differentials.

Both front axles are powered with modified MST CVA axles.

Axles are conected together with central tube with inner driveshaft of special construction.

Steering system with one servo for both front axles.

Simple but solid - this is unique Tatra chassis design!

Sophisticated steering system of both front axles using 20 kg steering servo (also included).

Aluminium support frame for rear bed.

Many detailed parts.

Complete chassis.

Suspension system combining metal coil springs and dust covers working as air suspension.

Each half axles is protected by rubber dust cover to avoid mud and sand getting into axle housing.

Cabine is mounted to interior floor using four M3 screws.

Tatra 813 8x8 KOLOS KIT packaging.

Views and questions VISITORS

No comments so far. Add your comment or question as the first.