Introduction » Offroad Car KITs » Toyota LJ70 (200mm) + CMX Chassis KIT + Motor and ESC
Toyota LJ70 (200mm) + CMX Chassis KIT + Motor and ESC
+ Rubber Fenders (200mm body width)
NEW
In Stock
You might be interested also in...
| Product no. / Goods name: | ||||
|---|---|---|---|---|
|
KIT-003 Toyota LJ70 + CMX Chassis KIT |
In Stock
|
Our price 449.00 USD (395.64 EUR) | |
|
KIT-004 Toyota LJ70 + CMX Chassis KIT + Motor and ESC |
In Stock
|
Our price 469.00 USD (413.27 EUR) | |
|
KIT-005 Toyota LJ70 (200mm) + CMX Chassis KIT |
In Stock
|
Our price 459.00 USD (404.46 EUR) |
2016 NEW
Toyota Land Cruiser LJ70 + CMX Kit
Kit of radio controlled offroad car in scale 1/10. Hardbody is made from hard black plastics and has many detailed parts. Hardbody is ready to install up to 14 LEDs. Comes as a KIT, unpainted. CMX chassis KIT by Max Speed Technology is very scale and durable offroad chassis in true 1/10 scale.
Set includes:
- Complete KIT of Toyota Land Cruiser LJ70 Hardbody by Loops Model
- Complete CMX Chassis KIT by Max Speed Technology (35T motor + waterproof XB60 ESC included!)
- Set of body mounts and bumper mounts + fasteners
- Instruction manual
*This is not an official MST kit! It is just a combo set by Loops Model!!
About LJ70:
Set includes:
- headlights with clear covers, buckets for 5mm LEDs
- front and rear lights with light buckets for 3mm LEDs
- side lights
- front metal grill
- two side grids for instalation under rear side window
- registration plate light holder
- rubber mirrors
- rubber wipers - 3pcs
- NEW! Pre-cut 1mm clear lexan window set!
- 4x rubber fender = 200mm total body width
About CMX chassis KIT:
A brand NEW CMX chassis by MST.
Made from high quality materials. Thanks to its small dimensions it is very suitable for Tamiya hardbodies and lexan bodies as well. Equiped with CVA front axles for 40° steering rate and oil filled shocks for perfect and smooth flex. Model is based on metal frame.
Set includes:
Complete chassis KIT with gearbox, axles, driveshaft, rims, tires, 35T motor and XB60 waterproof ESC
NOT INCLUDED:
Steering servo, Battery and charger, Receiver and Transmitter
Requires 2 channel RC set, steering servo and 7,2 Nimh or 7,4 Lipo battery for running.
Photos of completed and painted car are for ilustration only!
Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.
Made in Czech Republic
Our price 27.00 USD (23.79 EUR)