Toyota Land Cruiser 70 (Killerbody) Rubber Fender Set

This is a set of rubber fender flares for Killer Body Toyota Land Cruiser LC70 in scale 1/10. They fit the body without any modification. We recommend attaching with quality CA Glue or M2 screws from the inside.

Width of body with stock fenders: 195mm

Width of body with Loops Model wide fenders: 215mm

Using these fenders you can put body on wider trucks like Axial SCX10, MST CFX-W, Traxxas TRX 4 or any other.

Fenders are designed for using larger tires, you have to trim the body as shown on pictures.

*picture of finished car by Martin Tschöke, Germany

Material: quality rubber

Set for 1 complete car = 4 pieces. 

Products are completed of 90%. It is necessary to abrade the contact area before final assembly. Products may contain small extra parts from manufactury that needs to be cut out. Products may contain small air bubbles on the non-visible parts – they do not affect the strength. Use high quality CA glue to attach. Do not use Revell Contacta Liquid or Styrene Bondene and similar types of glues – they are not suitable.

Made in Czech Republic